FrançaisFR

Masonry restoration and building envelope repair in Montreal

Repointing, brick and stone repair, lintels, facade restoration and roofing: we restore the building envelope, with a written quote after a site visit.

Building envelope

Brick and block walls, facade restoration, repointing and roofing: we build and repair the envelope that protects your building from Quebec winters.

The envelope (exterior walls, masonry, roof and cladding) keeps water and cold outside. Crumbling brick, a receding joint or a rusted lintel let moisture in: repaired in time, they prevent much heavier work.

  • Qualified masonsInstallation and repair of brick, block and stone, in residential and commercial work
  • Construction CodeWork carried out according to the Quebec Construction Code
  • Written quoteScope of repairs, method and schedule set out before the work

I

Our masonry services

New construction or restoration, in Montreal, on the North Shore, including Laval, and on the South Shore.

Brick and block walls

Walls, low walls and facades in brick, concrete block, natural or manufactured stone, with careful, even and lasting workmanship.

  • Brick
  • Concrete block
  • Stone

Facade restoration

Repair of damaged bricks and joints, repointing and surface cleaning: the facade regains its character and its resistance to moisture.

  • Repointing
  • Cleaning
  • Waterproofing

Lintel replacement

A rusted steel lintel makes the brick above openings swell and crack. We shore, take down the masonry, replace the lintel and relay the brick.

  • Shoring
  • Steel lintel
  • Relaying

Decorative masonry

Natural stone veneers, architectural brick and custom finishes that enhance the look of your property.

  • Natural stone
  • Architectural brick
  • Custom

Repair and strengthening

Load-bearing walls and other damaged masonry work: safe, lasting strengthening, following the engineer's recommendations when the structure is affected.

  • Load-bearing walls
  • Strengthening
  • Engineer if required

Older buildings

On older buildings, the mortar is chosen to stay compatible with the original masonry, often lime-based, so it does not damage the brick or stone.

  • Compatible mortar
  • Lime
  • Original character

II

Roofing: the most exposed element

The roof takes the rain, the accumulated snow, freeze-thaw cycles and the wind. Well designed, it keeps water out, protects the structure from moisture and contributes to insulation. For commercial and heritage flat roofs, see also our Commercial roofing page.

Elastomeric membrane

Two-ply, the preferred solution for flat roofs in Quebec: resistant to frost, snow, impact and UV rays.

  • Two-ply
  • Flat roofs

TPO membrane

A white reflective surface that reduces the heat absorbed and the cooling needs of commercial and industrial buildings.

  • Reflective
  • Commercial

Metal roofing

Durable, resistant to fire, snow and wind, available in several finishes for commercial and industrial buildings.

  • Longevity
  • Low maintenance

Inspection and preventive maintenance

A regular inspection catches blisters, standing water and open seams early, and extends the life of the roof before a leak.

  • Inspection
  • Targeted repairs

III

Signs to watch for

Here is how we classify what you see on your exterior walls during an inspection.

  • Keep an eye on it

    Receding joints

    Joints that crumble or recede let water into the wall. Repointing done in time protects the brick.

  • Have it assessed

    Cracks above windows

    Stair-step cracks or displaced bricks above openings often point to a rusted, swelling lintel.

  • Deal with it quickly

    A leak or brick coming loose

    Water inside, falling bricks or a bulging wall call for prompt work to make the facade safe.

IV

How the work unfolds

From inspection to final check, a written process.

  1. InspectionA survey of the condition of the bricks, joints, lintels and roof, with photos.
  2. Detailed quoteScope of repairs, method, inclusions, exclusions and schedule.
  3. Permit and protectionPermit coordination with you, scaffolding installation and protection of the surroundings.
  4. The workDismantling, repair or rebuilding, repointing and cleaning.
  5. Final checkA walkthrough with you and delivery of the applicable written warranty.

V

Why choose Construction AIM for your envelope

Solid, careful work, built to last.

  • Masonry and roofing: one team for the whole envelope, from wall to roof.
  • No surprises: any deterioration found during the work is presented and approved in writing before it is dealt with.
  • A safe job site: compliant scaffolding and CNESST rules.
  • Residential and commercial: houses, plexes, apartment buildings and commercial buildings.

Rules that apply

Standards
Quebec Construction Code
Structure
OIQ member engineer, if required
Health and safety
CNESST
Labour
CCQ wage rates

In most Montreal boroughs, a permit is required before restoring a facade; it is coordinated with you and its fees are not included in our quotes.

X

Words you will hear on site

The parts of a building envelope, and what "réfection" (rebuilding) means.

Building envelope
All the elements that separate the inside from the outside: foundation, walls, windows and roof.
Rebuilding
Bringing an existing element back to new condition, such as exterior cladding, flashing or joints.
Air and vapour barriers
Membranes that control the movement of air and moisture in the walls to prevent condensation.
Sealant
A flexible joint that closes the gap between two materials, for example around a window or a door.
Repointing
Replacing the worn mortar between bricks or stones, to close the joints and keep water out.
Bulging wall (ventre-de-bœuf)
A brick wall bulging outward, often caused by corroded ties or water infiltration behind the veneer.
Lintel
A piece, often steel, that carries the masonry above a window or a door. When it rusts, it makes the brick crack.

VI

Service area

We repair facades, masonry and building envelopes in Montreal, on the North Shore, including Laval, and on the South Shore.

  1. 01
    MontrealEvery borough on the island, from the East End to the West Island: Anjou, Saint-Léonard, Rosemont, Villeray, Ahuntsic, Pointe-Claire, Kirkland and the rest.
  2. 02
    North ShoreLaval, Terrebonne, Repentigny, Blainville, Boisbriand, Saint-Eustache and Mirabel.
  3. 03
    South ShoreLongueuil, Brossard, Boucherville, Saint-Lambert, La Prairie and Châteauguay.
  4. Elsewhere in Quebec?Call us at (514) 654-9184 and we will tell you whether we can take on the job.

VII

Frequently asked questions

How long does a roof last?

A well-installed and well-maintained membrane lasts several decades; its actual life depends on the system, the slope and the maintenance. An annual inspection catches signs of wear early.

How often should brick joints be redone?

There is no fixed schedule: repointing is needed as soon as the joints crumble, recede or crack. On an exposed facade, a periodic inspection lets you act before water damages the brick.

What are the signs of a roof problem?

Standing water, blisters on the membrane, stains or leaks on the ceiling, damp insulation in the attic.

Why choose a TPO membrane?

For its reflective surface, which reduces the heat absorbed, its durability and its easy maintenance. It is especially suited to commercial flat roofs.

Do you need a permit to restore a facade?

Yes, in most Montreal boroughs a permit application is required before exterior restoration work. We coordinate it with you.

Does my building have to have its facades inspected?

Yes, if at least one facade has 5 or more storeys above ground. According to the Régie du bâtiment du Québec, the owner must obtain a report verifying that the facades are safe, prepared by a professional, no later than the 10th anniversary of construction, then every 5 years. The owner must also report any dangerous condition to the RBQ without delay and keep a register of the work. We carry out the masonry repairs recommended in the report. Source: RBQ.

How much does masonry work cost?

Our prices are based on the current wage rates of the Commission de la construction du Québec (CCQ), set by the collective agreements for the sector concerned (residential, institutional and commercial, industrial), plus the materials and equipment specific to each job. Every quote is free, detailed and prepared after a site visit.

What are the signs that the envelope needs to be redone?

Leaks near windows, stains on interior walls, cracked or loose sealants, rusted flashing, drafts or frost on the walls in winter. These signs often point to a water or air tightness problem: a visit finds the cause before we propose any rebuilding.

What causes a bulging brick wall?

A bulge is the brick veneer pushing outward. It often means that the ties holding the brick to the wall are corroded, or that water is getting in behind the veneer. Have it assessed quickly: depending on the condition of the wall, the affected section is taken down and rebuilt with new ties, on an engineer's advice when needed.

VIII

Further reading

Our guides on the envelope and roofing.

Next step

Is your facade or roof showing signs of wear?

Describe what you see in the form below and attach photos of the facade or the roof. We will schedule a visit, then give you a detailed written quote.

Describe my project

Page updated October 17, 2026.

Free quote · no obligation

Get a clear, detailed quote

Describe your project in a few minutes. We schedule a site visit, then give you a written quote that spells out the work included, the exclusions, the conditions and the schedule.

Prefer to talk to someone?

Your request

All fields are required except attachments. Photos help us prepare the visit.

By sending this form, you agree that Construction AIM may use this information to respond to your request, in accordance with its privacy policy.

Your information is used only to respond to your request.